The tariff-level qos-profile command configures a tariff level and QoS profile for DAA services.
The undo tariff-level qos-profile command restores the default configuration.
By default, no tariff level or QoS profile is configured for DAA services.
This command is supported only on the NetEngine 8000 F1A.
Usage Scenario
To limit the rate of DAA user traffic based on the parameters set in the QoS profile for a tariff level, run the tariff-level qos-profile command.
Prerequisites
A DAA service policy has been configured using the value-added-service policy <SERVICE-POLICY-NAME> daa command.
Precautions
This command is supported only on the admin VS.
The tariff-level qos-profile command can be run only in a DAA service policy. The tariff-level qos-profile command does not support a QoS profile with a time range. The tariff-level qos-profile command cannot be configured while the qos-profile is in 8cos-enhance mode.<HUAWEI> system-view [~HUAWEI] qos-profile test-name [*HUAWEI-qos-profile-test-name] commit [*HUAWEI-qos-profile-test-name] quit [~HUAWEI] aaa [~HUAWEI-aaa] accounting-scheme none [*HUAWEI-aaa-accounting-acct1] commit [~HUAWEI-aaa-accounting-acct1] quit [~HUAWEI-aaa] quit [~HUAWEI] value-added-service policy policy1 daa [*HUAWEI-vas-policy-policy1] commit [~HUAWEI-vas-policy-policy1] accounting-scheme none [~HUAWEI-vas-policy-policy1] traffic-separate enable [*HUAWEI-vas-policy-policy1] commit [*HUAWEI-vas-policy-policy1] tariff-level 1 qos-profile test-name