tariff-queue-mapping enable

Function

The tariff-queue-mapping enable command enables priority scheduling based on tariff levels.

The undo tariff-queue-mapping enable command disables priority scheduling based on tariff levels.

By default, priority scheduling based on traffic levels is disabled.

This command is supported only on the NetEngine 8000 F1A.

tariff-queue-mapping enable

undo tariff-queue-mapping enable

None

Value-added service policy view

2: Configuration level

Task Name	Operations
vas	write

Usage Scenario

Priority scheduling is performed on different services of DAA users to ensure that services with higher priorities can obtain sufficient bandwidth.

Prerequisites

A DAA service policy has been created using the value-added-service policy <service-policy-name> daa command.

Precautions

In VS mode, this command is supported only by the admin VS.

# Enable priority scheduling based on tariff levels.

<HUAWEI> system-view
[~HUAWEI] value-added-service policy policy1 daa
[~HUAWEI-vas-policy-policy1] tariff-queue-mapping enable