mpls te auto-frr (MPLS view)

Function

The mpls te auto-frr command enables the Auto FRR function globally.

The undo mpls te auto-frr command disables the Auto FRR function globally.

By default, auto FRR is disabled.

Format

mpls te auto-frr [ self-adapting ]

undo mpls te auto-frr

Parameters

Parameter	Description	Value
self-adapting	Enables the dynamic adaptation in Auto FRR.	-

Parameter

Description

Value

self-adapting

Enables the dynamic adaptation in Auto FRR.

Views

MPLS view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-te	write

Usage Guidelines

Usage Scenario

If MPLS TE Auto FRR is enabled globally, the mpls te auto-frr default command is automatically configured by default on every MPLS TE-enabled interface of the local node. To disable Auto FRR on some interfaces, run the mpls te auto-frr block command on these interfaces.

To enable an automatic bypass tunnel to dynamically select the node protection or link protection based on network conditions, configure self-adapting. If self-adapting is not specified, the Auto bypass tunnel selects node protection.

Example

# Enable the Auto FRR function.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] mpls te
[*HUAWEI-mpls] mpls te auto-frr