mpls te link administrative group

Function

The mpls te link administrative group command sets a value for the link administrative group on an interface.

The undo mpls te link administrative group command deletes the configuration.

By default, the value of the link administrative group is 0x0.

Format

mpls te link administrative group group-value

undo mpls te link administrative group

Parameters

Parameter	Description	Value
group-value	Sets a value for the link administrative group.	The value is a hexadecimal integer ranging from 0x0 to 0xFFFFFFFF. Each of the 32 bits in a value indicates an attribute, and each attribute occupies one bit.

Parameter

Description

Value

group-value

Sets a value for the link administrative group.

The value is a hexadecimal integer ranging from 0x0 to 0xFFFFFFFF. Each of the 32 bits in a value indicates an attribute, and each attribute occupies one bit.

Views

100ge sub-interface view, 100GE interface view, 10GE sub-interface view, 10GE interface view, 25GE sub-interface view, 25GE interface view, 400GE sub-interface view, 400GE interface view, 40GE sub-interface view, 40GE interface view, 50GE sub-interface view, 50GE interface view, Eth-Trunk sub-interface view, Eth-Trunk interface view, GE optical interface view, GE sub-interface view, GE electrical interface view, GMPLS-UNI interface view, Tunnel interface view, XGE sub-interface view, XGE interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-te	write

Usage Guidelines

Usage Scenario

The link administrative group is a 32-bit vector representing a set of link attributes. It works with the affinity for the system to determine the link that is used to set up an MPLS TE tunnel.

Configuration Impact

If the value of the link administrative group is changed using the command, the new value takes effect only for new LSPs, not for existing LSPs that have been set up before the new value is set.

Precautions

The command needs to be run only on the outbound interface of a link through which a TE tunnel passes.

Example

# Set the value of the link administrative group to 0x0101.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] mpls te
[*HUAWEI-mpls] quit
[*HUAWEI] interface GigabitEthernet0/1/0
[*HUAWEI-GigabitEthernet0/1/0] mpls
[*HUAWEI-GigabitEthernet0/1/0] mpls te
[*HUAWEI-GigabitEthernet0/1/0] mpls te link administrative group 101