mpls te bandwidth (Interface view)

Function

The mpls te bandwidth command sets the BC bandwidth for a link.

The undo mpls te bandwidth command deletes the bandwidth.

By default, no BC bandwidth is configured for a link.

Format

mpls te bandwidth { bc0 bc0Bw | bc1 bc1Bw | bc2 bc2Bw | bc3 bc3Bw | bc4 bc4Bw | bc5 bc5Bw | bc6 bc6Bw | bc7 bc7Bw } ^*

Parameters

Parameter	Description	Value
bc0 bc0Bw	Specifies the bandwidth value of BC0.	The value is an integer ranging from 0 to 4000000000, in kbit/s.
bc1 bc1Bw	Specifies the bandwidth value of BC1.	The value is an integer ranging from 0 to 4000000000, in kbit/s.
bc2 bc2Bw	Specifies the bandwidth value of BC2.	The value is an integer ranging from 0 to 4000000000, in kbit/s.
bc3 bc3Bw	Specifies the bandwidth value of BC3.	The value is an integer ranging from 0 to 4000000000, in kbit/s.
bc4 bc4Bw	Specifies the bandwidth value of BC4.	The value is an integer ranging from 0 to 4000000000, in kbit/s.
bc5 bc5Bw	Specifies the bandwidth value of BC5.	The value is an integer ranging from 0 to 4000000000, in kbit/s.
bc6 bc6Bw	Specifies the bandwidth value of BC6.	The value is an integer ranging from 0 to 4000000000, in kbit/s.
bc7 bc7Bw	Specifies the bandwidth value of BC7.	The value is an integer ranging from 0 to 4000000000, in kbit/s.

Views

100ge sub-interface view, 100GE interface view, 10GE sub-interface view, 10GE interface view, 25GE sub-interface view, 25GE interface view, 400GE sub-interface view, 400GE interface view, 40GE sub-interface view, 40GE interface view, 50GE sub-interface view, 50GE interface view, Eth-Trunk sub-interface view, Eth-Trunk interface view, GE optical interface view, GE sub-interface view, GE electrical interface view, GMPLS-UNI interface view, Tunnel interface view, XGE sub-interface view, XGE interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-te	write

Usage Guidelines

Usage Scenario

In real-world situations, the bandwidth value is set on outbound interfaces along links of a TE tunnel that requires sufficient bandwidth.

To change bandwidth BC values, reconfigure the mpls te bandwidth command. The latest configured BC bandwidth value overrides the previous one.

The BC bandwidth value is deleted after the undo mpls command is run in the system view or the undo mpls te command is run in the MPLS view.

Precautions

The parameters cr1 to ct7 are only used in DS-TE scenarios.

Example

# Set the link BC0 bandwidth to 1000 kbit/s.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] mpls te
[*HUAWEI-mpls] quit
[*HUAWEI] interface GigabitEthernet 0/1/0
[*HUAWEI-GigabitEthernet0/1/0] mpls
[*HUAWEI-GigabitEthernet0/1/0] mpls te
[*HUAWEI-GigabitEthernet0/1/0] mpls te bandwidth max-reservable-bandwidth 10000
[*HUAWEI-GigabitEthernet0/1/0] mpls te bandwidth bc0 1000