mpls te bandwidth dynamic bc0 (Interface view)

Function

The mpls te bandwidth dynamic bc0 command sets or modifies the dynamic bandwidth of BC0 on the link. That is, the percentage of BC0 that can be reserved for the maximum TE.

By default, the BC0 bandwidth of a link is not configured.

Format

mpls te bandwidth dynamic bc0 bc0-bw-percentage

Parameters

Parameter	Description	Value
bc0-bw-percentage	BC0 dynamic bandwidth value(%).	The value is a percent integer ranging from 1 to 100.

Parameter

Description

Value

bc0-bw-percentage

BC0 dynamic bandwidth value(%).

The value is a percent integer ranging from 1 to 100.

Views

100ge sub-interface view, 100GE interface view, 10GE sub-interface view, 10GE interface view, 25GE sub-interface view, 25GE interface view, 400GE sub-interface view, 400GE interface view, 40GE sub-interface view, 40GE interface view, 50GE sub-interface view, 50GE interface view, Eth-Trunk sub-interface view, Eth-Trunk interface view, GE optical interface view, GE sub-interface view, GE electrical interface view, GMPLS-UNI interface view, Tunnel interface view, XGE sub-interface view, XGE interface view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mpls-te	write

Usage Guidelines

Usage Scenario

The mpls te bandwidth dynamic bc0 command sets or modifies the dynamic bandwidth of BC0 on the link. That is, the percentage of BC0 that can be reserved for the maximum TE.

Example

# Set the proportion of the maximum reservable bandwidth to the physical bandwidth to 80% and the proportion of the BC0 bandwidth to the maximum reservable bandwidth to 60% on GE 0/1/0.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] mpls te
[*HUAWEI-mpls] quit
[*HUAWEI] interface GigabitEthernet 0/1/0
[*HUAWEI-GigabitEthernet0/1/0] mpls
[*HUAWEI-GigabitEthernet0/1/0] mpls te
[*HUAWEI-GigabitEthernet0/1/0] mpls te bandwidth max-reservable-bandwidth dynamic 80
[*HUAWEI-GigabitEthernet0/1/0] mpls te bandwidth dynamic bc0 60