te ipv6-router-id

Function

The te ipv6-router-id command sets a global TE IPv6 router ID.

The undo te ipv6-router-id command deletes a global TE IPv6 router ID.

By default, no global TE IPv6 router ID is set.

te ipv6-router-id ipv6Addr

undo te ipv6-router-id

Parameter	Description	Value
ipv6Addr	Specifies an IPv6 address.	The value is a 32-digit hexadecimal number, in the format of X:X:X:X:X:X:X:X.

Parameter

Description

Value

ipv6Addr

Specifies an IPv6 address.

The value is a 32-digit hexadecimal number, in the format of X:X:X:X:X:X:X:X.

System view

2: Configuration level

Task Name	Operations
mpls-te	write

Usage Scenario

To set a global TE IPv6 router ID, run the te ipv6-router-id command. The setting does not depend on global MPLS.

The TE IPv6 router ID must be configured on the tunnel ingress and can be set to any value. However, it must be globally unique.

# Set a global TE IPv6 router ID to 1::1.

<HUAWEI> system-view
[~HUAWEI] te ipv6-router-id 1::1