telnet client dscp

Function

The telnet client dscp command configures a DSCP value for the Telnet packets sent by a client.

The undo telnet client dscp command restores the default DSCP value of the Telnet packets sent by a client.

By default, the DSCP value of Telnet packets is 48.

telnet client dscp value

undo telnet client dscp value

undo telnet client dscp

Parameter	Description	Value
value	Specifies a DSCP value for the Telnet packets sent by a client.	The value is an integer ranging from 0 to 63.

Parameter

Description

Value

value

Specifies a DSCP value for the Telnet packets sent by a client.

The value is an integer ranging from 0 to 63.

System view

3: Management level

Task Name	Operations
telnet-client	write

To change the priority of the Telnet packets sent by a client, run the telnet client dscp command to change the DSCP value of the packets. A greater DSCP value indicates a higher priority.
When you run the undo ssh client dscp command:
- If value is not specified, the DSCP field is restored to the default value.
- If value is 48, the DSCP field is restored to the default value.
- If value is set to a non-48 value, the value must be the same as value in the telnet server dscp command. Otherwise, the command execution fails.
The command only takes effect for ipv4 packets.

# Set the DSCP value to 10 for the Telnet packets sent by a client.

<HUAWEI> system-view
[~HUAWEI] telnet client dscp 10