whitelist session-car telnet-server disable

Format

whitelist session-car telnet-server disable

undo whitelist session-car telnet-server disable

Parameters

None

Views

System view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
telnet-server	write

Usage Guidelines

The Telnet session CAR function is enabled by default. It isolates packet channels between Telnet Server sessions.

To disable this function on a device, run the whitelist session-car telnet-server disable command. Telnet Server packets received by this device will be sent directly to the CPCAR channel. If the device receives a large number of Telnet Server packets, packets from different Telnet Server sessions may preempt bandwidth resources. Therefore, disabling this function is not usually recommended.

Example

# Disable Telnet whitelist session CAR function.

<HUAWEI> system-view
[~HUAWEI] whitelist session-car telnet-server disable
Warning: When a device receives a large number of packets, the packets of different sessions may preempt the bandwidth of each other. You are advised not to disable this function.