eth-test stop

Function

The eth-test stop command stops an ETH-test instance.

Format

eth-test stop mep mep-id

Parameters

Parameter	Description	Value
mep mep-id	Specifies the ID of a MEP on which an ETH-test instance is to be stopped.	The value is an integer ranging from 1 to 8191.

Parameter

Description

Value

mep mep-id

Specifies the ID of a MEP on which an ETH-test instance is to be stopped.

The value is an integer ranging from 1 to 8191.

Views

MA view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
y1731	execute

Usage Guidelines

Usage Scenario

ETH-test instances are performed to test parameters for a unidirectional on-demand service or during an on-demand-service interruption. An ETH-test instance will stop after the specified timeout period elapses. To stop an instance manually, run the eth-test stop command.

Prerequisites

The ETH-test function has been enabled using the eth-test enable command.
An ETH-test instance has been enabled using the eth-test start command.

Example

# Stop an ETH-test instance.

<HUAWEI> system-view
[~HUAWEI] evpn
[*HUAWEI-evpn] quit
[*HUAWEI] evpn vpn-instance evrf
[*HUAWEI-evpn-instance-evrf] quit
[*HUAWEI] interface GigabitEthernet 0/1/1
[*HUAWEI-GigabitEthernet0/1/1] evpn binding vpn-instance evrf
[*HUAWEI-GigabitEthernet0/1/1] quit
[*HUAWEI] cfm enable
[*HUAWEI] cfm md md1
[*HUAWEI-md-md1] ma ma1
[*HUAWEI-md-md1-ma-ma1] map evpn vpn-instance evrf
[*HUAWEI-md-md1-ma-ma1] mep mep-id 1 interface GigabitEthernet 0/1/1 inward
[*HUAWEI-md-md1-ma-ma1] eth-test enable mep 1
[*HUAWEI-md-md1-ma-ma1] remote-mep mep-id 30 mac 00e0-fc12-7890
[*HUAWEI-md-md1-ma-ma1] commit
[~HUAWEI-md-md1-ma-ma1] eth-test stop mep 1