tftp-server ipv6 acl

Function

The tftp-server ipv6 acl command configures the ACL to control the access of clients to the FTP server.

The undo tftp-server ipv6 acl command cancels the configuration of the ACL.

By default, the ACL is not configured for the TFTP client.

Format

tftp-server ipv6 acl { acl-number | acl-name }

undo tftp-server ipv6 acl

Parameters

Parameter	Description	Value
acl-number	Specifies the IPv6 ACL number.	ACL number is an integer data type. The basic acl number value ranges from 2000 to 2999.
acl-name	Specifies the ACL6 name.	The value is a string of 1 to 64 case-sensitive characters without spaces. The value must start with a letter (a to z or A to Z, case sensitive).

Parameter

Description

Value

acl-number

Specifies the IPv6 ACL number.

ACL number is an integer data type. The basic acl number value ranges from 2000 to 2999.

acl-name

Specifies the ACL6 name.

The value is a string of 1 to 64 case-sensitive characters without spaces. The value must start with a letter (a to z or A to Z, case sensitive).

Views

System view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
tftp-client	write

Usage Guidelines

Usage Scenario

If a device serves as a TFTP client, you can configure the ACL on the device to control the login of the local device to the TFTP server through TFTP.

If no rule is configured, the incoming and outgoing calls are not restricted after the command tftp-server acl is run.

Precautions

If no rule is configured, the incoming and outgoing calls are not restricted after the command tftp server acl is run.

Example

# Enable the ipv6 ACL configuration on a TFTP server.

<HUAWEI> system-view
[~HUAWEI] acl ipv6 name test
[*HUAWEI-acl6-advance-test] quit
[*HUAWEI] tftp-server ipv6 server acl test