time-range non-accounting

Function

The time-range non-accounting command enables a device to stop accounting for user traffic within a specified time range.

The undo time-range non-accounting command restores the default configuration.

By default, this function is disabled.

This command is supported only on the NetEngine 8000 F1A.

Format

time-range non-accounting time-range-name

undo time-range non-accounting time-range-name

Parameters

Parameter	Description	Value
time-range-name	Specifies the name of a time range.	The value is a string of 1 to 32 case-sensitive characters, spaces not supported. It must start with an uppercase or lowercase letter. In addition, the word all cannot be specified as a time range name.

Parameter

Description

Value

time-range-name

Specifies the name of a time range.

The value is a string of 1 to 32 case-sensitive characters, spaces not supported. It must start with an uppercase or lowercase letter. In addition, the word all cannot be specified as a time range name.

Views

AAA domain view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
aaa	write

Usage Guidelines

Usage Scenario

To enable a device to stop accounting for user traffic within a period of time, run the time-range non-accounting command.

Prerequisites

A time range has been configured using the time-range <time-range-name> command.

Example

# Configure the device to stop accounting for user traffic in the time range time1.

<HUAWEI> system-view
[~HUAWEI] time-range time1 from 0:0 2009/1/1
[*HUAWEI] commit
[~HUAWEI] aaa
[~HUAWEI-aaa] domain domain1
[*HUAWEI-aaa-domain-domain1] commit
[~HUAWEI-aaa-domain-domain1] time-range non-accounting time1