traffic-policy(System view)

Function

The traffic-policy command applies a traffic policy globally.

The undo traffic-policy command cancels a traffic policy that is applied globally.

By default, no traffic policy is applied globally.

This command is supported only on the NetEngine 8000 F1A.

Format

traffic-policy policy-name { inbound | outbound }

undo traffic-policy policy-name { inbound | outbound }

Parameters

Parameter	Description	Value
policy-name	Specifies the name of a traffic policy that is applied. The value of policy-name must be different from the policy name predefined by the system.	The value is a string of 1 to 127 characters.
inbound	Indicates that the traffic policy is applied to the incoming packets. The network traffic from the user side to the carrier network side is in the upstream direction.	-
outbound	Indicates that the traffic policy is applied to the outcoming packets. The network traffic from the carrier network side to the user side is in the downstream direction.	-

Parameter

Description

Value

policy-name

Specifies the name of a traffic policy that is applied. The value of policy-name must be different from the policy name predefined by the system.

The value is a string of 1 to 127 characters.

inbound

Indicates that the traffic policy is applied to the incoming packets.

The network traffic from the user side to the carrier network side is in the upstream direction.

outbound

Indicates that the traffic policy is applied to the outcoming packets.

The network traffic from the carrier network side to the user side is in the downstream direction.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
qos	write

Usage Guidelines

Usage Scenario

In user access scenarios, you can run the traffic-policy command in the system view to apply a traffic policy globally. After a traffic policy is configured, the device matches user access packets based on the rules in the traffic policy.

Precautions

This command is supported only on the admin VS.

Example

# Apply the traffic policy named abc globally.

<HUAWEI> system-view
[~HUAWEI] traffic policy abc
[*HUAWEI-trafficpolicy-abc] quit
[*HUAWEI] traffic-policy abc inbound
Warning: After this operation is performed, the global ucl traffic policy becomes effective. Continue? [Y/N]:Y