traffic-separate enable

Function

The traffic-separate enable command enables DAA service separation.

The undo traffic-separate enable command disables DAA service separation.

By default, DAA service separation is disabled in the service policy view.

This command is supported only on the NetEngine 8000 F1A.

Format

traffic-separate enable

undo traffic-separate enable

Parameters

None

Views

Value-added service policy view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
vas	write

Usage Guidelines

Usage Scenario

To enable DAA service separation in a DAA service policy, run the traffic-separate enable command. After DAA service separation is enabled, service traffic of DAA users using this service policy is not counted into user traffic, and the bandwidth of service traffic is not restricted by user bandwidth.

Precautions

This command is supported only on the admin VS.

The traffic-separate enable and undo traffic-separate enable commands can be run only in a DAA service policy.

Example

# Enable DAA service separation in a DAA service policy named policy1.

<HUAWEI> system-view
[~HUAWEI] value-added-service policy policy1 daa
[~HUAWEI-vas-policy-policy1] traffic-separate enable