traffic match user-group

Function

The traffic match user-group command configures EDSG service traffic to match a user group.

The undo traffic match user-group command disables EDSG service traffic from matching a user group.

By default, no EDSG service traffic is configured to match a user group.

This command is supported only on the NetEngine 8000 F1A.

Format

traffic match user-group [ inbound | outbound ]

undo traffic match user-group [ inbound | outbound ]

Parameters

Parameter	Description	Value
inbound	Indicates upstream EDSG service traffic.	-
outbound	Indicates downstream EDSG service traffic.	-

Parameter

Description

Value

inbound

Indicates upstream EDSG service traffic.

outbound

Indicates downstream EDSG service traffic.

Views

Service policy view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
vas	write

Usage Guidelines

Usage Scenario

In load-balancing scenarios, different user groups are mapped to different services and user traffic is load-balanced based on multiple user groups. In this scenarios, after user traffic matches EDSG services, it must continue to match a user group for service selection. To match upstream or downstream EDSG service traffic to a user group, run the traffic match user-group command.

Precautions

The traffic match user-group command can be locally configured but cannot be delivered using RADIUS.

In VS mode, this command is supported only by the admin VS.

Example

# Configure upstream EDSG service traffic to match a user group.

<HUAWEI> system-view
[~HUAWEI] service-policy name test edsg
[*HUAWEI-service-policy-test] commit
[~HUAWEI-service-policy-test] traffic match user-group inbound