traffic policy

Function

The traffic policy command defines a traffic policy and displays the traffic policy view.

The undo traffic policy command deletes the traffic policy.

By default, there is a default traffic policy profile.

Format

traffic policy policy-name

undo traffic policy policy-name

Parameters

Parameter	Description	Value
policy-name	Specifies the name of a traffic policy. The policy name cannot be the name predefined by the system, that is, default.	The value is a string of 1 to 127 case-sensitive characters.

Parameter

Description

Value

policy-name

Specifies the name of a traffic policy. The policy name cannot be the name predefined by the system, that is, default.

The value is a string of 1 to 127 case-sensitive characters.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
mqc	write

Usage Guidelines

Usage Scenario

To configure a traffic policy for a traffic classifier, you can run this command to define a traffic policy and apply the policy to interfaces.

Prerequisites

The traffic classifier and traffic behavior are configured.

Follow-up Procedure

The traffic classifier is bound to the traffic behavior in the traffic policy and the traffic policy is applied to interfaces.

Precautions

If a traffic policy is applied to an interface, you are not allowed to delete the traffic policy directly. You need to cancel the application of the policy on the interface before using the undo traffic policy command to delete the policy.

Example

# Define a traffic policy named p1.

<HUAWEI> system-view
[~HUAWEI] traffic policy p1
[*HUAWEI-trafficpolicy-p1]