trust 8021p inbound vxlan-mode

Function

The trust 8021p inbound vxlan-mode command configures 802.1p-based BA classification for VXLAN packets.

The undo trust 8021p inbound vxlan-mode command cancels 802.1p-based BA classification for VXLAN packets.

By default, 802.1p-based BA classification for VXLAN packets is not configured.

Format

trust 8021p inbound vxlan-mode

undo trust 8021p inbound vxlan-mode

Parameters

None

Views

VPN instance IPv4 address family view, VPN instance view, Bridge domain view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
qos	write

Usage Guidelines

Usage Scenario

To configure 802.1p-based BA classification for VXLAN packets when VXLAN packets are forwarded out of a VXLAN tunnel and the outbound interface of the route is a sub-interface, run the trust 8021p vxlan-mode command.

Prerequisites

The trust upstream <ds-domain-name> inbound vxlan-mode command has been configured.

Precautions

If both a physical interface and bridge domain are configured with BA classification, the BA classification in the BD view preferentially takes effect.

Example

# Configure 802.1p-based BA classification for VXLAN packets.

<HUAWEI> system-view
[~HUAWEI] bridge-domain 1
[*HUAWEI-bd 1] trust 8021p inbound vxlan-mode