tunnel-per-user

Function

The tunnel-per-user command configures the tunnel for each L2TP user on the LAC.

The undo tunnel-per-user command deletes the tunnel of each L2TP user.

By default, the tunnel for each L2TP user on the LAC is not configured.

This command is supported only on the NetEngine 8000 F1A.

Format
Parameters
Views
Default Level
Task Name and Operations
Usage Guidelines
Example

Format

tunnel-per-user

undo tunnel-per-user

Parameters

None

Views

L2TP group view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
l2tp	write

Usage Guidelines

To allow an L2TP user to use a tunnel on the LAC, run the tunnel-per-user command. If the Tunnel per user field is displayed as 1 in the display l2tp-group command output, the tunnel-per-user command has been run.

Example

# Configure each L2TP user to use an L2TP tunnel.

<HUAWEI> system-view
[~HUAWEI] l2tp-group huawei
[*HUAWEI-l2tp-huawei] tunnel-per-user