tunnel-selector (BGP-L2VPN-AD address family view)

Function

The tunnel-selector command configures a device to apply a tunnel selector.

The undo tunnel-selector command does not apply a tunnel selector to a device.

By default, no tunnel selector is applied.

Format

tunnel-selector tunnel-selector-name

undo tunnel-selector

Parameters

Parameter	Description	Value
tunnel-selector-name	Name of the tunnel selector.	The value is a string of 1 to 40 case-sensitive characters, spaces not supported.

Parameter

Description

Value

tunnel-selector-name

Name of the tunnel selector.

The value is a string of 1 to 40 case-sensitive characters, spaces not supported.

Views

BGP-L2VPN-AD address family view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bgp	write

Usage Guidelines

Usage Scenario

In an inter-AS BGP VPLS Option B scenario, to apply a tunnel selector to a device, run the tunnel-selector command. Then, the device recurses L2VPN-AD routes to tunnels that are selected based on a tunnel policy applied to the tunnel selector.

Prerequisites

A tunnel selector has been created using the tunnel-selector command in the system view.

Precautions

After the tunnel selector applied to BGP L2VPN-AD routes is deleted, L2VPN services may be interrupted because the BGP L2VPN-AD routes cannot recurse to tunnels.

Example

# Apply a tunnel selector to BGP L2VPN-AD routes.

<HUAWEI> system-view
[~HUAWEI] tunnel-selector tps permit node 10
[*HUAWEI-tunnel-selector] quit
[*HUAWEI] bgp 100
[*HUAWEI-bgp] l2vpn-ad-family
[*HUAWEI-bgp-af-l2vpn-ad] tunnel-selector tps