probe-failtimes (UDP test instance)

Function

The probe-failtimes command sets a threshold for the number of consecutive probe failures in an NQA UDP test instance. Once this threshold is reached, a trap is sent to the NMS.

The undo description command restores the default threshold for the number of consecutive probe failures in an NQA UDP test instance.

By default, a trap is sent for each probe failure.

Format

probe-failtimes failTimes

undo probe-failtimes

Parameters

Parameter	Description	Value
failTimes	Specifies the threshold for the number of consecutive probe failures in an NQA test instance.	The value is an integer ranging from 1 to 15.

Parameter

Description

Value

failTimes

Specifies the threshold for the number of consecutive probe failures in an NQA test instance.

The value is an integer ranging from 1 to 15.

Views

NQA view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
sla	write

Usage Guidelines

Usage Scenario

An NQA test checks whether response packets are received in a probe. If no response to a probe packet is received, the probe fails. When the number of consecutive probe failures in an NQA test instance reaches the specified threshold, a trap is sent to the NMS.

Prerequisites

The type of an NQA test instance has been specified using the test-type command.

Follow-up Procedure

After the probe-failtimes command is executed, run the send-trap probefailure command to enable the system to send traps to the NMS after the number of consecutive probe failures reaches the specified threshold.

Precautions

If parameters need to be changed during the running of the test instance, the system prompts you whether to terminate the test instance. Press "Y" or "N" as required.

If you press "Y", the test instance is terminated and parameters changed. The settings take effect after being committed. To restart the test instance, run the start command.
If you press "N", the test instance keeps running, and the parameters fail to be modified.

Example

# Set times in an NQA test instance named user test to 10.

<HUAWEI> system-view
[~HUAWEI] nqa test-instance user test
[*HUAWEI-nqa-user-test] test-type udp
[*HUAWEI-nqa-user-test] probe-failtimes 10