user-fqdn

Function

The user-fqdn command configures a user-fully qualified domain name (USER-FQDN) for IKE peers that are allowed to access.

The undo user-fqdn command deletes the USER-FQDN for IKE peers that are allowed to access.

By default, no USER-FQDN is configured for IKE peers that are allowed to access.

This command is supported only on the NetEngine 8000 F1A.

Format

user-fqdn user-fqdn

undo user-fqdn user-fqdn

Parameters

Parameter	Description	Value
user-fqdn	Specifies a USER-FQDN of an entity.	The value is a string of 1 to 255 case-sensitive characters. The string does not contain question marks or spaces. The string can contain spaces if it is enclosed with double quotation marks (").

Parameter

Description

Value

user-fqdn

Specifies a USER-FQDN of an entity.

The value is a string of 1 to 255 case-sensitive characters. The string does not contain question marks or spaces. The string can contain spaces if it is enclosed with double quotation marks (").

Views

IKE peer filter set view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ike	write

Usage Guidelines

To describe an entity, run the user-fqdn command to configure a USER-FQDN for the entity.

A local device uses a USER-FQDN to filter IKE peers that attempt to access. If a USER-FQDN inconsistency occurs, IKE negotiation with the IKE peer fails.

Example

# Set the USER-FQDN of an entity to test.xyz.com.

<HUAWEI> system-view
[~HUAWEI] ike identity identity1
[*HUAWEI-ike-identity-identity1] user-fqdn test.xyz.com