The user-group-queue command configures a user group queue for VLAN users.
The undo user-group-queue command deletes a user group queue from VLAN users.
By default, no user group queue is configured for VLAN users.
This command is supported only on the NetEngine 8000 F1A.
Parameter | Description | Value |
---|---|---|
user-group-queue-name |
Specifies the name of a user group queue. |
The value is a string of 1 to 31 characters. The name should start with an English letter (a to z, or A to Z) and can be a combination of English letters, numbers, hyphens (-), or underlines (_). |
identifier identifier |
Specifies a queue allocation mode. |
The value can be ce-vid, pe-ce-vid, pe-vid, vlan-id, or none. |
inbound |
Specifies the inbound direction. |
- |
outbound |
Specifies the outbound direction. |
- |
group groupname |
Specifies the name of a shared group. |
The value is a string of 1 to 31 characters. The name should start with an English letter (a to z, or A to Z) and can be a combination of English letters, numbers, hyphens (-), or underlines (_). |
<HUAWEI> system-view [~HUAWEI] user-group-queue test [~HUAWEI-user-group-queue-test] quit [~HUAWEI] interface GigabitEthernet 0/1/7.1 [*HUAWEI-GigabitEthernet0/1/7.1] commit [~HUAWEI-GigabitEthernet0/1/7.1] user-vlan 1 100 [~HUAWEI-GigabitEthernet0/1/7.1-vlan-1-100] user-group-queue test outbound