user-group

Function

The user-group command creates a user group.

The undo user-group command deletes an existing user group.

By default, no user group is configured.

This command is supported only on the NetEngine 8000 F1A.

Format

user-group group-name

undo user-group group-name

Parameters

Parameter	Description	Value
group-name	Specifies the name of a user group.	The value is a string of 1 to 32 characters.

Parameter

Description

Value

group-name

Specifies the name of a user group.

The value is a string of 1 to 32 characters.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
aaa-access	write

Usage Guidelines

Usage Scenario

User groups are used to control user access in different domains for ACL control. To control user access in different domains, run the user-group command to create a user group, configure a QoS policy for the user group, and run the user-group (AAA domain view) to bind the user group to a specific domain.

Precautions

In VS mode, this command is supported only by the admin VS.

A user group can be bound to multiple domains, but one domain can be bound to only one user group.

You cannot delete a user group that is not created.

Example

# Create a user group named group1.

<HUAWEI> system-view
[~HUAWEI] user-group group1