user volume-quota apply

Function

The user volume-quota apply command applies a user traffic volume quota to upstream or downstream traffic.

The undo user volume-quota apply command restores the default configuration.

By default, the user traffic volume quota applies to both upstream and downstream traffic.

This command is supported only on the NetEngine 8000 F1A.

Format

user volume-quota apply { inbound | outbound }

undo user volume-quota apply [ inbound | outbound ]

Parameters

Parameter	Description	Value
inbound	Applies the user traffic volume quota to upstream traffic.	-
outbound	Applies the user traffic volume quota to downstream traffic.	-

Parameter

Description

Value

inbound

Applies the user traffic volume quota to upstream traffic.

outbound

Applies the user traffic volume quota to downstream traffic.

Views

AAA domain view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
aaa-access	write

Usage Guidelines

Usage Scenario

While providing prepaid services, carriers can perform accounting based on the upstream traffic, downstream traffic, or both the upstream and downstream traffic. To apply a user traffic volume quota to upstream or downstream traffic, run the user volume-quota apply command.

Configuration Impact

After the user volume-quota apply command is run, the user traffic volume quota decreases with the specified upstream or downstream traffic volume.

If the user volume-quota apply command is run more than once, the latest configuration overrides the previous one.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Apply a traffic volume quota to downstream traffic for a user who goes online in domain test.

<HUAWEI> system-view
[~HUAWEI] aaa
[~HUAWEI-aaa] domain test
[*HUAWEI-aaa-domain-test] commit
[~HUAWEI-aaa-domain-test] user volume-quota apply outbound