value-added-service enable

Function

The value-added-service enable command enables the value-added service globally.

The undo value-added-service enable command disables the value-added service globally.

By default, the value-added service is disabled.

This command is supported only on the NetEngine 8000 F1A.

value-added-service enable

undo value-added-service enable

None

System view

2: Configuration level

Task Name	Operations
vas	write

Usage Scenario

The value-added-service enable command is used to enable value-added services.

Configuration Impact

You must enable the value-added service before configuring and using the value-added service.

Precautions

In VS mode, this command is supported only by the admin VS.

# Enable the value-added service globally.

<HUAWEI> system-view
[~HUAWEI] value-added-service enable