value-added-service policy

Function

The value-added-service policy command creates a value added service policy or enters the view of an existing service policy.

The undo value-added-service policy command deletes a value added service policy.

By default, the value added service policy is not created.

This command is supported only on the NetEngine 8000 F1A.

Format

value-added-service policy service-policy-name [ daa | bod ]

undo value-added-service policy service-policy-name

Parameters

Parameter	Description	Value
service-policy-name	Specifies the name of a service policy.	The value is a string of 1 to 63 characters.
daa	Indicates the destination address accounting service type.	-
bod	Indicates the BoD accounting service.	-

Parameter

Description

Value

service-policy-name

Specifies the name of a service policy.

The value is a string of 1 to 63 characters.

daa

Indicates the destination address accounting service type.

bod

Indicates the BoD accounting service.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
vas	write

Usage Guidelines

Usage Scenario

The value-added-service policy command is used to configure a value-added service policy template or enter the view of an existing service policy.

Precautions

In VS mode, this command is supported only by the admin VS.

In the view of creating a new policy, this command must carry the parameter daa or bod. Such parameters do not need to be carried in the view of a created policy.

Example

# Create a BOD policy profile named policy1 globally and enter the BOD policy profile view.

<HUAWEI> system-view
[~HUAWEI] value-added-service policy policy1 bod
Info: Create a new value-added-service policy.