set vlan-statistics subinterface enable

Function

The set vlan-statistics subinterface enable command enables PPPoE statistics collection on a QinQ interface.

The undo set vlan-statistics subinterface enable command restores the default configuration.

By default, PPPoE statistics collection is disabled on a QinQ interface.

This command is supported only on the NetEngine 8000 F1A.

Format

set vlan-statistics subinterface enable

undo set vlan-statistics subinterface enable

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
pppoebras	write

Usage Guidelines

Usage Scenario

To check PPPoE statistics on a QinQ interface, run the set vlan-statistics subinterface enable command to enable PPPoE statistics collection on the QinQ interface. Alternatively, you can load the PAF file to enable this function. After the PAF file is loaded, PPPoE statistics collection takes effect regardless of whether the set vlan-statistics subinterface enable command is run.

Precautions

This command is supported only on the admin VS.

Example

# Enable PPPoE statistics collection on a QinQ interface.

<HUAWEI> system-view
[~HUAWEI] set vlan-statistics subinterface enable