statistic enable (VLAN view)

Function

The statistic enable command enables VLAN packet statistics collection.

The undo statistic enable command disables VLAN packet statistics collection.

By default, VLAN packet statistics collection is disabled.

Format

statistic enable

undo statistic enable

Parameters

None

Views

VLAN view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
vlan	write

Usage Guidelines

Usage Scenario

By default, VLAN packet statistics collection is disabled. Before viewing VLAN packet statistics of a specified interface for fault location, run the statistics enable command to enable VLAN packet statistics collection.

Prerequisites

The VLAN has been created using the vlan command in the system view.

A Layer 2 Ethernet interface has been added to the VLAN.If the interface is a Layer 3 Ethernet interface , run the portswitch command in the interface view to switch the interface to a Layer 2 interface.

If the Layer 2 Ethernet interface directly connects to a user terminal,
Configure the Layer 2 Ethernet interface as an access interface using the port link-type access command.
Add the access interface to the VLAN using the port default vlan vlan-id command.
If the Layer 2 Ethernet interface connects to an interface of another switching device,
Configure the interface as a trunk interface using the port link-type trunk command to configure the interface as a trunk interface.
Add the trunk interface to specified VLANs using the port trunk allow-pass vlan command.

Configuration Impact

After running the statistic enable command, you can run the display vlan statistics command to view VLAN packet statistics, which help locate faults.

Example

# Enable packet statistics of VLAN 10.

<HUAWEI> system-view
[~HUAWEI] vlan 10
[*HUAWEI-vlan10] statistic enable