hard-pipe enable (VSI-LDP view)

Function

The hard-pipe enable command enables the hard pipe capability in the VSI-LDP view.

The undo hard-pipe enable command disables the hard pipe capability in the VSI-LDP view.

By default, the hard pipe capability is not enabled in the VSI-LDP view.

Format

hard-pipe enable

undo hard-pipe enable

Parameters

None

Views

VSI-LDP view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
l2vpn	write

Usage Guidelines

Usage Scenario

In the VSI-LDP view, before configuring hard pipe parameters for a static PW, you have to enable the hard pipe capability using the hard-pipe enable command.

Precautions

If a VSI is bound to an interface, the hard-pipe enable command and the qos-profile command are mutually exclusive in the VSI view.

Example

# Enable the hard pipe capability in the VSI-LDP view.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] quit
[*HUAWEI] mpls l2vpn
[*HUAWEI-l2vpn] quit
[*HUAWEI] vsi vsi1
[*HUAWEI-vsi-vsi1] pwsignal ldp
[*HUAWEI-vsi-vsi1-ldp] hard-pipe enable