interface-parameter-type vccv

Function

The interface-parameter-type vccv command restores the VCCV byte (an interface parameter) in the Mapping packet.

The undo interface-parameter-type vccv command deletes the VCCV byte in the Mapping packet.

By default, a Mapping packet carries the VCCV byte.

Format

interface-parameter-type vccv

undo interface-parameter-type vccv

Parameters

None

Views

VSI-LDP-PW view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
l2vpn	write

Usage Guidelines

Usage Scenario

If LDP VPLS is configured for a device running V800R005 or later to communicate with the devices running VRP V300R001 or branch versions, configure the undo interface-parameter-type vccv command.

Precautions

Note that the command can be configured only for the corresponding local VPLS.

Example

# When configuring LDP VPLS, delete the VCCV byte in the Mapping packet.

<HUAWEI> system-view
[~HUAWEI] mpls
[*HUAWEI-mpls] quit
[*HUAWEI] mpls l2vpn
[*HUAWEI-l2vpn] quit
[*HUAWEI] vsi vsi1 static
[*HUAWEI-vsi-vsi1] pwsignal ldp
[*HUAWEI-vsi-vsi1-ldp] vsi-id 100
[*HUAWEI-vsi-vsi1-ldp] peer 2.2.2.2
[*HUAWEI-vsi-vsi1-ldp] peer 2.2.2.2 pw pw1
[*HUAWEI-vsi-vsi1-ldp-pw1] undo interface-parameter-type vccv