vpls-pruning-mode tm-switch enable

Function

The vpls-pruning-mode tm-switch enable command enables switching from NP pruning to TM pruning in VPLS scenarios.

The undo vpls-pruning-mode tm-switch enable command disables switching from NP pruning to TM pruning in VPLS scenarios.

By default, switching from NP pruning to TM pruning is not enabled in VPLS scenarios.

Format
Parameters
Views
Default Level
Task Name and Operations
Usage Guidelines
Example

Format

vpls-pruning-mode tm-switch enable

undo vpls-pruning-mode tm-switch enable

Parameters

None

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
l2vpn	write

Usage Guidelines

Usage Scenario

To restore the default pruning mode in which PW traffic is pruned on a TM module in VPLS forwarding, run the vpls-pruning-mode tm-switch enable command to enable switching from NP pruning to TM pruning.

Example

# Enable switching from NP pruning to TM pruning in a VPLS scenario.

<HUAWEI> system-view
[~HUAWEI] vpls-pruning-mode tm-switch enable