fragment enable (VPLS Mac ping test instance)

Function

The fragment enable command enables MPLS packet fragmentation for an NQA VPLS MAC ping test instance.

The undo fragment enable command restores the default configuration.

By default, MPLS packet fragmentation is disabled for NQA test instances.

Format
Parameters
Views
Default Level
Task Name and Operations
Usage Guidelines
Example

Format

fragment enable

undo fragment enable

Parameters

None

Views

NQA view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
sla	write

Usage Guidelines

Usage Scenario

If the MPLS packet length of an NQA test instance is greater than the MTU of a specified MPLS tunnel, MPLS packets fail to pass through the tunnel. To allow the packets to pass through the tunnel, run the fragment enable command to enable MPLS packet fragmentation.

Example

# Enable MPLS packet fragmentation for an NQA test instance.

<HUAWEI> system-view
[~HUAWEI] nqa test-instance user test
[*HUAWEI-nqa-user-test] test-type vplsping
[*HUAWEI-nqa-user-test] fragment enable