advertise route-reoriginate evpn disable

Function

The advertise route-reoriginate evpn disable command disables the re-generation capability of EVPN routes for the specified VPN instance.

The undo advertise route-reoriginate evpn disable command restores the default configuration.

By default, the system is not configured to disable the re-generation of EVPN routes for the specified VPN instance.

Format

advertise route-reoriginate evpn disable

undo advertise route-reoriginate evpn disable

Parameters

None

Views

BGP-VPN instance IPv4 address family view, BGP-VPN instance IPv6 address family view

Default Level

2: Configuration level

Task Name and Operations

Task Name Operations
bgp write

Usage Guidelines

Usage Scenario

IP prefix routes and IRB routes received by the device can be advertised to neighboring devices after being regenerated. By configuring advertise route-reoriginate evpn disable, you can disable route regeneration based on the VPN instance.

Example

# Disable the re-generation capability of EVPN routes for the specified VPN instance.
<HUAWEI> system-view
[~HUAWEI] bgp 100
[*HUAWEI-bgp] ipv4-family vpn-instance vpn1
[*HUAWEI-bgp-vpn1] advertise route-reoriginate evpn disable
[*HUAWEI-bgp-vpn1] quit
[*HUAWEI-bgp] ipv6-family vpn-instance vpna
[*HUAWEI-bgp-6-vpna] advertise route-reoriginate evpn disable
Parent Topic: EVPN Configuration Commands
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >