auto-frr (BGP-VPNv6 address family view)

Function

The auto-frr command enables BGP Auto fast reroute (FRR).

The undo auto-frr command restores the default configuration.

By default, BGP Auto FRR is disabled.

Format

auto-frr

undo auto-frr

Parameters

None

Views

BGP-VPNv6 address family view

Default Level

2: Configuration level

Task Name and Operations

Task Name Operations
bgp write

Usage Guidelines

Implementation Procedure

If both the ip frr and auto-frr commands are configured, the auto-frr command takes precedence over the ip frr command.

Precautions

Using both BGP Auto FRR and BFD is recommended. They can rapidly detect a link fault and switch traffic to a backup link if a fault occurs.

Example

# Enable Auto FRR in the BGP-VPNv6 address family view.
<HUAWEI> system-view
[~HUAWEI] bgp 100
[*HUAWEI-bgp] ipv6-family vpnv6
[*HUAWEI-bgp-af-vpnv6] auto-frr
Parent Topic: BGP Configuration Commands
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >