peer route-policy import (BGP-VPNv6 address family view)(IPv6)

Function

The peer route-policy import command specifies a route-policy for filtering routes received from a peer.

The undo peer route-policy import command deletes a specified route-policy.

By default, no route-policy is configured for filtering routes received from a peer.

Format

peer ipv6-address route-policy policy-name import

undo peer ipv6-address route-policy policy-name import

Parameters

Parameter	Description	Value
ipv6-address	Specifies the IPv6 address of a BGP peer.	The value is a 32-digit hexadecimal number, in the format of X:X:X:X:X:X:X:X.
policy-name	Name of the route policy.	The value is a string of 1 to 200 case-sensitive characters, spaces not supported.

Parameter

Description

Value

ipv6-address

Specifies the IPv6 address of a BGP peer.

The value is a 32-digit hexadecimal number, in the format of X:X:X:X:X:X:X:X.

policy-name

Name of the route policy.

The value is a string of 1 to 200 case-sensitive characters, spaces not supported.

Views

BGP-VPNv6 address family view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
bgp	write

Usage Guidelines

Usage Scenario

After a route-policy is created, the peer route-policy import command is used to apply a Route-Policy to a peer so that the routes received from the peer can be controlled. To be specific, only the necessary routes are received from the peer. In this manner, route management is implemented, the scale of the routing table is reduced, and fewer network resources are consumed.

Prerequisites

If the command specifies a route-policy that does not exist, use the route-policy command to create the route-policy.

Configuration Impact

If the peer route-policy command is run for a peer group, all the members of the peer group inherit the configuration.

The peer route-policy command is mutually exclusive with the peer route-filter commands.

Binding a route-policy after a BGP peer relationship is established may cause peer flapping.

Example

# Apply a route-policy named test-policy to the routes received from a peer.

<HUAWEI> system-view
[~HUAWEI] route-policy test-policy permit node 10
[*HUAWEI-route-policy] quit
[*HUAWEI] bgp 100
[*HUAWEI-bgp] peer 2001:db8:1::1 as-number 100
[*HUAWEI-bgp] ipv6-family vpnv6
[*HUAWEI-bgp-af-vpnv6] peer 2001:db8:1::1 enable
[*HUAWEI-bgp-af-vpnv6] peer 2001:db8:1::1 route-policy test-policy import