The peer advertise-large-community command enables a device to advertise the Large-Community attribute to a BGP peer group.
The undo peer advertise-large-community command cancels the configuration.
By default, a device does not advertise the Large-Community attribute to its BGP peer group.
Usage Scenario
To enable a device to advertise the Large-Community attribute to its BGP peer group, run the peer advertise-large-community command. If the Large-Community attribute is advertised to a peer group, all the peer members in the group inherit this configuration. This simplifies the application of route-policies and facilitates route maintenance and management.
Prerequisites
Specific Large-Community values have been defined in a route-policy.
<HUAWEI> system-view [~HUAWEI] ip vpn-instance vpn1 [*HUAWEI-vpn-instance-vpn1] ipv6-family [*HUAWEI-vpn-instance-vpn1-af-ipv6] route-distinguisher 100:1 [*HUAWEI-vpn-instance-vpn1-af-ipv6] quit [*HUAWEI-vpn-instance-vpn1] quit [*HUAWEI] bgp 100 [*HUAWEI-bgp] ipv6-family vpn-instance vpn1 [*HUAWEI-bgp-6-vpn1] group test external [*HUAWEI-bgp-6-vpn1] peer test as-number 200 [*HUAWEI-bgp-6-vpn1] peer test advertise-large-community