track admin-vsi

Format

track admin-vsi vsi-name

undo track admin-vsi

Parameters

Parameter	Description	Value
vsi-name	Specifies the name of a VSI.	The value is a string of 1 to 31 case-sensitive characters, spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string.

Parameter

Description

Value

vsi-name

Specifies the name of a VSI.

The value is a string of 1 to 31 case-sensitive characters, spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string.

Views

VSI-AUTO view, VSI-BVSI view, VSI-DEFAULT view, VSI-IVSI-BEVPNINTERWORK view, VSI-IVSI-P2P view, VSI-STATIC view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
l2vpn	write

Usage Guidelines

Usage Scenario

The track admin-vsi command applies only to LDP VPLS. You must run the pwsignal and vsi-id commands before running the track admin-vsi command.

The track admin-vsi command can be used only in the service VSI.

A service VSI can be bound only to one mVSI.

To prevent the service VSI from encountering routing loops in an STP over PW scenario, run this command.

Example

# Bind the service VSI named V200 to the mVSI named V100.

<HUAWEI> system-view
[~HUAWEI] mpls l2vpn
[*HUAWEI-l2vpn] quit
[*HUAWEI] vsi v100 static
[*HUAWEI-vsi-v100] pwsignal ldp
[*HUAWEI-vsi-v100-ldp] vsi-id 100
[*HUAWEI-vsi-v100-ldp] quit
[*HUAWEI-vsi-v100] admin-vsi
[*HUAWEI-vsi-v100] quit
[*HUAWEI] vsi v200 static
[*HUAWEI-vsi-v200] pwsignal ldp
[*HUAWEI-vsi-v200-ldp] vsi-id 200
[*HUAWEI-vsi-v200-ldp] quit
[*HUAWEI-vsi-v200] track admin-vsi v100