vsm verification instance-address

Function

The vsm verification instance-address disable command enables instance-based address verification.

The vsm verification instance-address enable command disables instance-based address verification.

By default, instance-based address verification is enabled.

This command is supported only on the NetEngine 8000 F1A.

Format

vsm verification instance-address disable

undo vsm verification instance-address disable

Parameters

Parameter	Description	Value
undo	Enable instance-based address verification.	-
disable	Disable instance-based address verification.	-

Parameter

Description

Value

undo

Enable instance-based address verification.

disable

Disable instance-based address verification.

Views

System view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
nat	write

Usage Guidelines

Usage Scenario

CGN services use the multi-core architecture. After an address pool is configured for an instance, the FES module delivers the configured address pool to the CGN control plane and then to the multi-core (forwarding plane) to implement address pool configuration. To improve service reliability, run the vsm verification instance-address enable command to enable instance-based address verification between the CGN control plane and multi-core CPU.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Disable instance-based address verification.

<HUAWEI> system-view
[~HUAWEI] vsm verification instance-address disable