warning-exhaust(IPv6 address pool view)

Function

The warning-exhaust command enables the address exhaustion alarm function for an IPv6 address pool.

The undo warning-exhaust command disables the address exhaustion alarm function for an IPv6 address pool.

By default, the address exhaustion alarm function is disabled for an IPv6 address pool.

This command is supported only on the NetEngine 8000 F1A.

Format

warning-exhaust

undo warning-exhaust

Parameters

None

Views

IPv6 address pool view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ippool	write

Usage Guidelines

Usage Scenario

After the** warning-exhaust** command is executed, the system generates an address exhaustion alarm when addresses in an IPv6 address pool are exhausted, prompting the administrator to plan the IPv6 addresses. When IPv6 addresses in the IPv6 address pool are exhausted, users cannot go online.

When address usage of the IPv6 address pool falls below 90%, the address exhaustion alarm is cleared.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Enable the address exhaustion alarm function for an IPv6 address pool named huawei.

<HUAWEI> system-view
[~HUAWEI] ipv6 pool huawei bas local
Info: Create an ipv6 pool.
[*HUAWEI-ipv6-pool-huawei] commit
[~HUAWEI-ipv6-pool-huawei] warning-exhaust