warning-exhaust

Function

The warning-exhaust command enables the address exhaustion alarm function for an address pool or address pool group.

The undo warning-exhaust command disables the address exhaustion alarm function for an address pool or address pool group.

By default, the address exhaustion alarm function is disabled for an address pool or address pool group.

This command is supported only on the NetEngine 8000 F1A.

Format

warning-exhaust

undo warning-exhaust

Parameters

None

Views

Bas IP address pool view, Address pool group view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
ippool	write

Usage Guidelines

Usage Scenario

After the warning-exhaust command is executed, the system generates an address exhaustion alarm when IP addresses in an address pool or address pool group are exhausted, prompting the administrator to plan the IP addresses. When IP addresses in the address pool or address pool group are exhausted, users cannot go online.

When IP address usage of the address pool or address pool group falls below 90%, the address exhaustion alarm is cleared.

Precautions

In VS mode, this command is supported only by the admin VS.

Example

# Enable the address exhaustion alarm function for an address pool named huawei.

<HUAWEI> system-view
[~HUAWEI] ip pool huawei bas local
Info: It's successful to create an IP address pool
[*HUAWEI-ip-pool-huawei] commit
[~HUAWEI-ip-pool-huawei] warning-exhaust