web-server identical-url

Usage Scenario

Mandatory web authentication is a function that enables the to redirect the access request of a user to the web server when a user accesses an unauthorized address before being authenticated, facilitating user authentication.

If a customized Portal attribute is configured, after the receives a user packet that needs to be redirected, the adds the keyword and corresponding attribute to the string of the redirection URL in the redirection packet and sends the packet to the user. After receiving this redirection packet, the user accesses the web server. The access packet carries the device IP address, user IP address, user's physical location information, and corresponding keyword. The forwards the packet to the web server. The web server parses the packet based on the keyword and pops up the request homepage to the user based on the user information in the packet.

Precautions

This command is supported only on the admin VS.

• When you run the web-server command in the AAA domain view, check whether the web authentication server to which the active/standby server in IP mode is the same as that in URL mode. If they are different, you cannot run the web-server command.
• The active web server must be different from the standby Web server.
• In IPv6 forcible redirection scenarios, you must run the web-server identical-url command. This configuration allows IPv4 and IPv6 users to use identical URL and the IPv6 redirection web page to be pushed to users.