whitelist session-car radius disable

Function

The whitelist session-car radius disable command disables session CAR for the RADIUS whitelist.

The undo whitelist session-car radius disable command enables session CAR for the RADIUS whitelist.

By default, session CAR for the RADIUS whitelist is enabled.

Format

whitelist session-car radius disable

undo whitelist session-car radius disable

Parameters

None

Views

System view

Default Level

3: Management level

Task Name and Operations

Task Name	Operations
radius	write

Usage Guidelines

Usage Scenario

Session CAR for the RADIUS whitelist is enabled by default to isolate the whitelist packet channel. This allows session-specific rate limiting and avoids packets from different RADIUS sessions from preempting bandwidth resources. If session CAR for the RADIUS whitelist makes the system prone to attacks, run the whitelist session-car radius disable command to disable session CAR for the RADIUS whitelist and ensure normal sending of RADIUS packets.

Precautions

Session CAR for the RADIUS whitelist can be disabled only when this function does not work properly. In normal cases, you are advised to enable session CAR for the RADIUS whitelist.

Example

# Disable session CAR for the RADIUS whitelist.

<HUAWEI> system-view
[~HUAWEI] whitelist session-car radius disable

# Enable session CAR for the RADIUS whitelist.

<HUAWEI> system-view
[~HUAWEI] undo whitelist session-car radius disable