forwarding-simulation inbound-interface (Ethernet-service test instance)

Function

The forwarding-simulation inbound-interface command specifies a simulated inbound interface.

The undo forwarding-simulation inbound-interface command deletes the simulated inbound interface configuration.

By default, no simulated inbound interfaces are configured.

Format

forwarding-simulation inbound-interface { ifName | ifType ifNum }

undo forwarding-simulation inbound-interface

Parameters

Parameter	Description	Value
ifName	Specifies the name of a simulated inbound interface.	-
ifType	Specifies the name of a simulated inbound interface.	-
ifNum	Specifies the number of a simulated inbound interface.	-

Parameter

Description

Value

ifName

Specifies the name of a simulated inbound interface.

ifType

Specifies the name of a simulated inbound interface.

ifNum

Specifies the number of a simulated inbound interface.

Views

NQA view

Default Level

2: Configuration level

Task Name and Operations

Task Name	Operations
sla	write

Usage Guidelines

Usage Scenario

By default, NQA test packets of Ethernet-service test type are considered as host packets. The host packets have a higher forwarding priority than the forwarded packets.

The forwarding-simulation inbound-interface command specifies a simulated interface through which the NQA test packets, same as the forwarded packets, are forwarded to the product forwarding channel.

Example

# Configure the simulated inbound interface for NQA test instance of ethernet-service test type.

<HUAWEI> system-view
[~HUAWEI] nqa test-instance user test
[*HUAWEI-nqa-user-test] test-type ethernet-service
[*HUAWEI-nqa-user-test] forwarding-simulation inbound-interface GigabitEthernet 0/1/1