test-flow

Function

The test-flow command binds NQA test flows to a test instance on an initiator.

The undo nqa test-flow command deletes the bindings between NQA test flows and a test instance.

By default, no NQA test flows are bound to a test instance.

Format

test-flow { testFlowId } &<1-16>

undo test-flow

Parameters

Parameter Description Value
testFlowId

Specifies the ID of an NQA test flow.

The value is an integer ranging from 1 to 65535.

Views

NQA view

Default Level

2: Configuration level

Task Name and Operations

Task Name Operations
sla write

Usage Guidelines

Usage Scenario

A test service instance is configured after the service flow characteristics, bandwidth profile, SAC are configured on an initiator of an Ethernet service activation test. To bound NQA test flows to the test service instance, run the test-flow command.

Precautions

This command is only run for an Ethernet service activation test instance.

Example

# Bind NQA test flows to a test service instance.
<HUAWEI> system-view
[~HUAWEI] nqa test-instance user test
[*HUAWEI-nqa-user-test] test-type ethernet-service
[*HUAWEI-nqa-user-test] test-flow 1 2 3
Parent Topic: NQA Configuration Commands
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >