The debugging lpt command enables debugging on the LPT module.
The undo debugging lpt command disables debugging on the LPT module.
By default, debugging is disabled on the LPT module.
debugging lpt { all | error | event | message } [ interface { ifName | ifType ifNum } ]
undo debugging lpt { all | error | event | message } [ interface { ifName | ifType ifNum } ]
Enables all debugging functions.
-
Enables error debugging.
Enables event debugging.
Enables message debugging.
Specifies the type and number of an interface.
User view
3: Management level
To enable debugging on the LPT module, run the debugging lpt command. The command output can be used for fault locating.
<HUAWEI> debugging lpt all