The debugging snmp-agent command enables debugging of all types of SNMP information.
The undo debugging snmp-agent command disables debugging of various types of SNMP information.
By default, SNMP debugging is disabled.
debugging snmp-agent { dispatch | msgproc | security | vacm | agent | notify | all | shell | misc | proxy | set-cache | packet [ peer-ip ip-address | [ query | set | notification ] mib-node node-oid ] }
undo debugging snmp-agent { dispatch | msgproc | security | vacm | agent | notify | all | shell | misc | proxy | set-cache | packet }
| Parameter | Description | Value |
|---|---|---|
| dispatch |
Dispatcher debugging logs. |
- |
| msgproc |
Enables debugging information about msgproc of the SNMP module. |
The value is a string of 1 to 255 case-sensitive characters, spaces not supported. |
| security |
Enables debugging information about security of the SNMP module. |
- |
| vacm |
Enables debugging information about vacm of the SNMP module. |
- |
| agent |
Enables debugging information about agent of the SNMP module. |
- |
| notify |
Enables debugging information about notify of the SNMP module. |
- |
| all |
Enables all debugging functions of the SNMP module. |
- |
| shell |
Enables debugging information about shell of the SNMP module. |
- |
| misc |
Enables debugging information about misc of the SNMP module. |
- |
| proxy |
Enables debugging information about proxy of the SNMP module. |
- |
| set-cache |
Enables debugging information about set-cache of the SNMP module. |
- |
| packet |
Enables debugging functions about packet of the SNMP module. |
- |
| peer-ip ip-address |
Enables debugging information about the specified peer IP address. |
The value is in dotted decimal notation. |
| query |
Enables debugging information about the query operation.n. |
- |
| set |
Enables debugging information about the SET operation. |
- |
| notification |
Enables debugging information about the Trap or Inform operation. |
- |
| mib-node node-oid |
Enables debugging information about the MIB node of a specified OID. |
The value is a string of 1 to 255 characters. |
Usage Scenario
The debugging snmp-agent command displays all types of SNMP information. You can also specify the dispatch, msgproc, security, vacm, agent, notify, shell, and misc parameters to view the specified type of debugging information and determine whether the currently sent and received packets are correct.
Precautions
Debugging information is output on the screen. Do not output too much information for purposes other than debugging so that the performance is not affected.
The function of filtering trap/inform packets by node name applies only to IETF-compliant traps. The traps that are reported in the Huawei-specific or non-IETF standard format may not carry notification node names and therefore do not support this function.