The debugging bgp packet update flow vpnv4 command enables the debugging of Update messages carrying VPNv4 routes in the BGP-Flow address family of a specified VPN instance.
The undo debugging bgp packet update flow vpnv4 command disables the debugging of Update messages carrying VPNv4 routes in the BGP-Flow address family of a specified VPN instance.
By default, debugging of BGP packets is disabled.
| Parameter | Description | Value |
|---|---|---|
| peer peerIpv4Addr |
Specifies the IP address of an IPv4 peer. |
The value is in dotted decimal notation. |
| receive |
Outputs debugging information about the specified packet. receiving direction. |
- |
| send |
Outputs debugging information about the specified packet. sending direction. |
- |
Usage Scenario
The debugging bgp packet command enables debugging of BGP packets so that you can view the information during BGP packet receiving and sending.
Follow-up Procedure
Run the undo debugging bgp packet command to disable debugging.
Precautions
Debugging information is output on the screen. Do not output too much information for other purposes than debugging so that the performance is not affected.