The debugging bgp instance packet update vpnv4 command enables the debugging of Update messages carrying VPNv4 routes in a BGP multi-instance.
The undo debugging bgp instance packet update vpnv4 command disables the debugging of Update messages carrying VPNv4 routes in a BGP multi-instance.
By default, debugging of BGP packets is disabled.
| Parameter | Description | Value |
|---|---|---|
| peer peerIpv4Addr |
Specifies the IP address of an IPv4 peer. |
The value is in dotted decimal notation. |
| ip-prefix ip-prefix-name |
Specifies the name of an IP prefix list. |
The name is a string of 1 to 169 case-sensitive characters, with spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string. |
| receive |
Outputs debugging information about the specified packet. receiving direction. |
- |
| send |
Outputs debugging information about the specified packet. sending direction. |
- |
| instance bgpName |
Specifies the name of a BGP multi-instance. |
The value is a string of 1 to 31 case-sensitive characters, spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string. |
Usage Scenario
The debugging bgp packet command enables debugging of BGP packets so that you can view the information during BGP packet receiving and sending.
Follow-up Procedure
Run the undo debugging bgp packet command to disable debugging.
Precautions
Debugging information is output on the screen. Do not output too much information for other purposes than debugging so that the performance is not affected.