The debugging bgp packet update mvpn vpnv6 command enables the debugging of BGP Update messages of MVPN VPNv6.
The undo debugging bgp packet update mvpn vpnv6 command disables the debugging of BGP Update messages of MVPN VPNv6.
By default, debugging of BGP packets is disabled.
| Parameter | Description | Value |
|---|---|---|
| receive |
Outputs debugging information about the specified packet receiving direction. |
- |
| send |
Outputs debugging information about the specified packet sending direction. |
- |
| peer |
Specifies the peer. |
- |
| peerIpv4Addr |
Specifies the IP address of an IPv4 peer. |
The value is in dotted decimal notation. |
| peerIpv6Addr |
Specifies the IP address of an IPv6 peer. |
The value is a 32-digit hexadecimal number, in the format of X:X:X:X:X:X:X:X. |
Usage Scenario
The debugging bgp packet command enables debugging of BGP packets so that you can view the information during BGP packet receiving and sending.
Follow-up Procedure
Run the undo debugging bgp packet command to disable debugging.
Precautions
Debugging information is output on the screen. Do not output too much information for other purposes than debugging so that the performance is not affected.