The debugging bmp packet all command enables BMP packet output debugging.
The undo debugging bmp packet all command disables BMP packet output debugging.
By default, BMP packet output debugging is disabled.
| Parameter | Description | Value |
|---|---|---|
| session ipv4Addr |
Specifies the IPv4 address used for the BMP session. |
The value is in dotted decimal notation. |
| ipv6Addr |
Specifies the IPv6 address used for the BMP session. |
The value is a 32-digit hexadecimal number, in the format of X:X:X:X:X:X:X:X. |
| alias aliasName |
Specifies the alias of a session. |
The value is a string of 1 to 31 case-sensitive characters, spaces not supported. When double quotation marks are used around the string, spaces are allowed in the string. |
Usage Scenario
If an exception occurs in a BMP session, run the debugging bmp packet all command to enable BMP packet output debugging. The command output can help you locate the problem.
Precautions
After a debugging function is enabled, a great amount of debugging information will be displayed, degrading system performance. Therefore, disable the debugging function after it is complete.